Q: What does the T-point lift do?
A: T-Point is designed from the ground up as a work force multiplier and time saver. It
makes your vehicle capable of doing what a tractor can do by adding a three point hitch
to the rear of your vehicle. This allows you to do various tasks such as grading roads,
plowing snow, leveling dirt or planting a wildlife/ game food plot.
Q: Does it have a float capability
A: T-Point does have float capability, which means that it floats up and down as the
terrain changes to maintain a steady height.
The 1 1/4 inch T-Point Lift does have Limited power down force but not float
Q: Can I adjust it for camber and angle of an implement?
A: T-Point does adjustable links on both sides to allow someone to adjust an implements
camber for crowning a road. It also has an adjustable top link to make changing the bite
angle possible. Just like a Tractor!
Q: What type of three point implements can I use behind my vehicle.
A: It accepts virtually all types of CAT 1 or Cat 0 three point tractor implements not
requiring a PTO.
Q: How heavy is the T-point lift?
A: The T-Point lift is approximately 150 lbs, by itself with no implements.
The 1 1/4 inch T-point Lift is 60 lbs keeping weight down for ATVs and UTVs.
Q: Does it come apart?
A: The T-Point can be disassembled. It can be disassembled into a total of 6 sub
components with the use of quick release pins. T-Point was designed to be easy to use
and the quick releases are included to make installation and removal less strenuous and
Q: What type vehicles can it be used behind.
A: The T-Point Lift can be used behind most vehicles with a standard 2 inch receiver
hitch. Some of the vehicles may be but not limited to Full size pickup trucks, Compact
Pickup trucks, full size SUV , most mid size SUV's equipped with 2" receivers, Jeeps,
Land Rovers, Land Cruisers and other Jeep type vehicles. If you own a large UTV(Utility
Vehicle) such as a Kubota or Mule it can work behind them too if they also have a 2"
The 1 1/4 inch T-Point Lift will work on any ATV, SUV UTV having a 1 1/4 inch receiver
Or may be used in conjunction with a 2 inch to 1 1/4 inch receiver adapter for more
of vehicles it may be mounted on.
Q: Can I plow snow with it.
A: Yes you can. It is best done with a scraper blade behind the tow vehicle and then
driving through the snow to pull it off to the sides or turn the blade around and push it off
to the side. Either way can work if you are in the need.
THREE POINT HITCH
for your truck, SUV, Jeep, or UTV/ATV
1640 CR 2015
Ivanhoe, TX 75447
Company and Product
|Vehicle 3-Point Hitch /Lift
|T-Point Lift by Ranch Solutions